|
MEASUREMENT
Mode 1:
Time interval between excitation
pulse and first backwall echo, using contact transducers.
Mode 2:
Time interval between the first interface echo after the excitation
pulse and the first backwall echo, using delay line or immersion
transducers.
Mode 3:
Time interval between successive backwall echoes following the first
interface echo after the excitation pulse, using delay line or
immersion transducers.
Thickness
Measurement Range:
Steel: 0.006 - 20.000 inches (0.150 -
508.00 mm)
Plastic: 0.003
- 2.0000 inches (0.080 -50.00 mm)
Thickness
range depends on material, transducer, surface condition, temperature,
and SETUP selected.
Material
Velocity Range:
0.02000 -
0.55110 inch/µS (0.5080 - 13.9979 mm/µS)
Resolution: keypad selectable:
LOW: 0.01" 0.1
mm
STANDARD:
0.001" 0.01 mm
HIGH: 0.0001"
0.001 mm
Battery: 6
V Rechargeable NiCad battery pack, or field-replaceable alkaline AA
batteries
Battery Life:
25 hours in normal measurement mode with backlight off
Fast-Charger: Two-hour Fast
Charger with universal voltage
Auto Power Off:
On or off
Transducer
Frequency Range: 2-30 MHz (-3 dB)
Operating
Temperature: -10°C to +50°C. (+14° to 122°F)
Keypad:
Sealed color-coded keypad with tactile and audible feedback
Case:
Water-resistant, gasketed Lexan® case with sealed connectors
Metric/English
Units
Min/Max Mode
Two Alarm
Modes: Programmable Hi-Low Alarm with audible and visual
indicators.
1) Standard Hi-Low
2) Previous
thickness
-Absolute
-Percentage
Two
Differential Modes:
1) Thickness
difference between actual measurement and reference value.
2) Percent
difference between actual measurement and reference value.
Application
Auto-Recall: Automatically adjusts internal parameters and zero
offset for a wide variety of transducers.
Stored
Standard Setups: 25 stored transducer setups to allow fast, easy
calibration for our standard transducers.
Stored Custom
Setups: Up to 35 stored custom transducer setups for best
performance in special applications.
Size:
9.375 x 5.45 x 1.5" (238 x 138 x 38 mm)
Weight:
2.1 lbs. (0.95 kg) |
INTERNAL DATALOGGER
Data logger
and RS-232: Identifies,
stores, recalls, clears, and transmits thickness readings, waveform
images, and gage setup information via the RS-232 Serial Port. Baud
Rate, Word Length, Stop Bits, and Parity are adjustable from the
keypad.
Maximum # of
Stored Values:
Standard:
18,000 thickness readings or 1,700 waveforms with thickness Upgrade 1:
36,000 thickness readings or 3,400 waveforms with thickness Upgrade 2:
54,000 thickness readings or 5,100 waveforms with thickness
Location Codes: 8-character file
name plus 16-character alphanumeric location code input. Multiple
Comments per location.
File
Structures: 7 standard or custom application-specific file
structures
Reports:
On-gage reporting of: Summary with statistics, Min/Max with locations,
and File Comparison. On-screen comparison of current and previous
readings.
DISPLAY
Display:
Liquid Crystal Display with
backlight. Contrast keypad adjustable. Display area 4.0 x 3.39 inch
(102 x 86 mm)
Backlight,
Zoom Mode, Freeze Mode and Hold/Blank
Rectification:
RF, half wave positive or negative, and full wave
Waveform
Display Range and Delay Control
ORDERING INFORMATION
Model 25MX
PLUS Digital Ultrasonic Thickness Gage, AC or Battery Operation,
50-60Hz, with Internal Alphanumeric Datalogger. Including: Universal
Quick Charger/AC Adapter Transducer Cable, Test Block, Couplant,
RS-232 I/O Cable, Carrying Case, Instruction Manual and Two Year
Limited Warranty
OPTIONAL ACCESSORIES
MX-8 Multiplexer
PLUS/RPC
Rubber Protective Pouch with Neck Strap
36DLP/SPC/KIT
Protective Pouch with Neck Strap
WIN25DLPLUS
Interface Program
25DLP/EW
Extended Limited Warranty, 3rd Year
2214E
5-Step Test Block, 1018 steel, English Units: .100", .200", .300",
.400", .500" metric available
2213E
5-Step Test Block, Aluminum, English Units: .100", .200", .300",
.400", .500" metric available
26DLPLUS/HDC
Heavy Duty Shipping Case
|
The Panametrics-
NDT™ 25MX PLUS is an ultrasonic precision thickness gage that provides
cost-effective solutions in applications where the opposite side of the
test material is difficult or impossible to reach. Multipoint and single
thickness measurements can be made on a wide variety of materials
including metal, plastic, rubber, glass, fiberglass, and composites.
s
contact, delay line, and immersion transducers